If you want to spice up a piece of clothing, accessory, luggage piece or perhaps hats you can sew on badges to obtain the new look easily. Badges or patches when placed strategically can immediately replace the look of a garment or accessory and take it from boring to spunky in a matter of minutes. In case you have children and they keep earning badges of merit you would want to sew them on. However, as intimidating as it might sound, sewing on badges isn’t very difficult once you know how to get it done.
To start this approach to sewing on a badge, start by placing the badge to the place in which you want it. Now secure the badge well with a few pins so it stays in place and doesn’t shift when you are sewing it on. Now if you’re putting the patch on a garment, you have to fix the patch after which try the garment on to make sure that the patch or the badge looks right in the place. If the patch requires a little readjustment you can do it at this time easily.
Now thread the needle ensuring that the thread you are using isn’t too long. Maintain the thread at a length of approximately 18inches for simple maneuvering. If your thread is simply too long then you might get bothered by knots. Once you’ve the thread ready create a knot at the end of the thread. It is possible to thread a needle yourself by holding the non knotted end in between your forefinger and thumb after which passing it through the eye of your needle. You could also take the aid of a needle threader if you find threading a needle in such a manner difficult.
Pass the needle through the badge and also the fabric making sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you started stitching keeping this distance from the last stitch constantly. Continue stitching round the entire perimeter of the badge until you have completely finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread using a single stitch. Pull the thread securely to secure the knot and after that cut off any excess thread that is left. Lastly remove the excess safety pins that you were using to secure the patch in position.
It’s also possible to sew on badges by using a sewing machine if you don’t want to do the same manually. Pick a thread that matched the color of your patch after which you can tread your machine. You may also select a contrasting color depending on the look which you want to give your badge. Once this is accomplished you have to start sewing you badge. Utilize the top of the badge for your starting place and sew all along the edge of your badge making use of the regular stitch mode ending at your beginning point. Once done, cut the excess thread that connects the badge to the machine and your garment is ready for usage with the badge.