The way to sew on badges by hand or by machine

When you want to spice up a garment, accessory, luggage piece or perhaps hats you can easily sew on badges to obtain the fresh look easily. Badges or patches when placed strategically can immediately affect the look of a garment or accessory and take it from boring to spunky within just a few minutes. If you’ve got children and they keep earning badges of merit you wish to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy when you know the way to get it done.

To do this procedure of sewing on a badge, begin with placing the badge on the place where you want it. Now secure the badge well with some pins in order that it stays into position and doesn’t shift when you’re sewing it on. Now if you’re putting the patch on a garment, you have to fix the patch and after that try the garment on to make sure that the patch or the badge looks right in the place. In case your patch needs a little readjustment you can do it at this point easily.

Now thread the needle making sure that the thread that you are using isn’t too long. Keep the thread on a length of approximately 18inches for easy maneuvering. If the thread is simply too long then you might get bothered by knots. When you’ve the thread ready make a knot at the end of the thread. It is possible to thread a needle by hand by holding the non knotted end in between your forefinger and thumb and then passing it in the eye of the needle. You may also get the help of a needle threader if you find threading a needle in such a manner difficult.

Pass the needle in the badge as well as the fabric making sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you commenced stitching keeping this distance from the last stitch constantly. Continue stitching around the entire perimeter of the badge till you have completed stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by using a single stitch. Pull the thread strongly to secure the knot and then cut off any excess thread that’s left. Lastly take off the excess safety pins that you were using to secure the patch into position.

You can also sew on badges with the help of a sewing machine in case you don’t wish to accomplish the same yourself. Pick a thread that matched the hue of the patch after which tread your machine. It’s also possible to pick a contrasting color with regards to the look that you like to present your badge. Once this is done you ought to start sewing you badge. Use the surface of the badge as your starting position and sew all along the edge of your badge making use of the regular stitch mode ending at your beginning point. Once done, cut the extra thread that connects the badge to the machine and your garment is ready for use with the badge.